Shop TRQ on 1AAuto.com
Fuel Pump Module Assembly
Shop TRQ on Amazon
Fuel Pump Module Assembly
This video shows you how to install a fuel pump module assembly on your 2002-2008 Dodge Ram 1500. Combustion engines need three things to operate: fuel, air, and spark. If your fuel pump isn’t delivering the fuel your engine needs, it will run poorly, or not at all. Or, the pump is fine, but your fuel gauge isn’t working. Many modern pumps include an integrated sending unit. Either way, a new engineered to fit fuel pump for TRQ is just what you need.
This repair was done on a 2004 Dodge Ram 1500 Laramie 5.7L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2002 Dodge Ram 1500
2003 Dodge Ram 1500
2004 Dodge Ram 1500
2005 Dodge Ram 1500
2006 Dodge Ram 1500
2007 Dodge Ram 1500
2008 Dodge Ram 1500
Tools you will need:
• 10mm Wrench
• 15mm Socket
• 7mm Socket
• Fuel Line Disconnect Tool
• Needle nose pliers
• Needle nose pliers
• 7/8 Inch Socket
• Torque Wrench
• 3/8 Inch Wrench
• Gloves
• Safety Glasses
• Brass Punch
• Drain Pan
• Floor Jack
• Pick
• Wheel Chocks
Subscribe:
Check out our playlist:
Dodge Ram 1500 3rd Generation 2002-2008:
📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information:
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto https://1aau.to/m-Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
So if the fuel pump isn’t working how are you meant to run the engine to depressurize the system?
Thank u
If you need to be told about about safety then you truly don’t need to be working on your vehicle. Obviously you don’t have experience and the risk of you messing something up is pretty high. My opinion.
I took the 6 bolts out from under my bed and got help to just slide the bed back way easier then lifting the truck and lowering the tank most people don’t have tank holder for their jack